Compact industrial fan
Dense fan and motor secured to a pallet
48 × 40 × 48 in
Packaged weight: 900 lb
- Cubic feet
- 53.33
- Density
- 16.88lb/cu ft
Estimated class
70
70
Industrial Fan LTL Shipping Guide
Freight Class for Industrial Fan
To estimate your shipment, use the Industrial Fan Freight Class Calculator.
The Industrial Fan Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 70 to 175.
These are density-based estimates.
Industrial Fan density calculator
Calculate Your Industrial Fan Freight Class
A crated centrifugal fan is preloaded as an example. Adjust the packaged dimensions or weight to calculate your industrial fan freight class.
Your result
Cubic feet
150.00
Density
7.33
lb/cu ft
Estimated freight class
125
This is an example density-based estimate. Update any field to calculate your shipment.
Industrial Fan shipment examples
Industrial Fan Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic industrial fan shipment formats can produce different density-based class estimates.
Crated centrifugal fan
Wheel, housing, motor, and base protected
72 × 60 × 60 in
Packaged weight: 1,100 lb
- Cubic feet
- 150.00
- Density
- 7.33lb/cu ft
Estimated class
125
125
Large fan assembly
Wide housing and inlet with protective clearance
96 × 84 × 72 in
Packaged weight: 1,400 lb
- Cubic feet
- 336.00
- Density
- 4.17lb/cu ft
Estimated class
175
175
Industrial Fan shipment comparison
Industrial Fan Freight Class by Shipment Format
Industrial Fan freight class can change with the enclosure size, coils or burners, fans, piping, insulation, protective clearance, and top-load restrictions. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Industrial Fan shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact industrial fan | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to higher | Limited | Dense fan and motor secured to a pallet; this example calculates to 16.88 lb/cu ft and Class 70. |
| Crated centrifugal fan | Framed crate with internal restraint and protection for controls and moving parts | Medium to lower | Possible with engineered crate | Wheel, housing, motor, and base protected; this example calculates to 7.33 lb/cu ft and Class 125. |
| Large fan assembly | Elongated or oversized crate with structural bracing and protective clearance | Lower | Usually non-stackable | Wide housing and inlet with protective clearance; this example calculates to 4.17 lb/cu ft and Class 175. |
| Equipment with fans, controls, and accessories | Main equipment skid plus separately protected controls, panels, duct pieces, pumps, or piping components | Varies | Usually limited | Accessories and protective framing can materially change the final cubic volume and density. |
Industrial Fan shipping options
Choosing a Shipping Method for Industrial Fan
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Industrial Fan shipment | Common shipping option |
|---|---|
| Compact industrial fan | Standard LTL with packaging and handling review |
| Crated centrifugal fan | Standard LTL with packaging and handling review |
| Large fan assembly | LTL with handling review or volume service |
| Equipment with fans, controls, and accessories | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent industrial fan shipments may need carrier review before booking.
Industrial Fan Packaging, Stackability, and Damage Risk
Industrial Fan Packaging
- Secure the cabinet, vessel, or frame to a reinforced skid and brace tall or broad enclosures.
- Protect coils, burners, fans, doors, refractory, nozzles, piping stubs, and control panels from impact.
- Cap openings and keep loose filters, panels, duct pieces, sensors, and accessories restrained and labeled.
Industrial Fan Stackability
- Treat equipment with fans, coils, vents, piping, or uneven roofs as non-stackable.
- Only use stackable status when a separate structural frame carries the load above the equipment.
- Keep lifting points, base rails, center-of-gravity marks, and upright instructions visible.
Industrial Fan Fragility and Liability
- Protect thin fins, insulation, refractory, doors, seals, instruments, and control components from shock and weather.
- Drain or secure approved fluids and close all service connections before shipping.
- Confirm handling and liability requirements for large, high-value, or site-critical process equipment.
Before Requesting a Industrial Fan Freight Quote
How to Measure a Packaged Industrial Fan Shipment
- Measure after the industrial fan is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Industrial Fan Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Industrial Fan Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.