Dense machine skid
Compact power or process unit on a skid
48 × 40 × 36 in
Packaged weight: 1800 lb
- Cubic feet
- 40.00
- Density
- 45.00 lb/cu ft
Estimated class
Density-based
55
Industrial Equipment LTL Shipping Guide
Freight Class for Industrial Equipment
To estimate your shipment, use the Industrial Equipment Freight Class Calculator.
The Industrial Equipment Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 55 to 85.
These are density-based estimates.
Industrial Equipment density calculator
Calculate Your Industrial Equipment Freight Class
A crated industrial-equipment shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your industrial equipment freight class.
Your result
Cubic feet
80.00
Density
27.50
lb/cu ft
Estimated freight class
65
This is an example density-based estimate. Update any field to calculate your shipment.
Industrial Equipment shipment examples
Industrial Equipment Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all industrial equipment shipments.
Crated equipment system
Enclosed production equipment package
60 × 48 × 48 in
Packaged weight: 2200 lb
- Cubic feet
- 80.00
- Density
- 27.50 lb/cu ft
Estimated class
Density-based
65
Bulky light equipment
Large framed assembly with lower density
72 × 48 × 72 in
Packaged weight: 1800 lb
- Cubic feet
- 144.00
- Density
- 12.50 lb/cu ft
Estimated class
Density-based
85
Industrial Equipment shipment comparison
Industrial Equipment Freight Class by Shipment Type
Industrial equipment ranges from compact dense machines to tall framed systems and large low-density assemblies. The finished skid or crate, concentrated weight, lifting points, protrusions, center of gravity, and stackability can change the shipment profile substantially.
| Industrial Equipment shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact machine or power unit | Bolted to a reinforced skid | Very high | Limited | Distribute concentrated weight and expose rated lifting points. |
| Crated production equipment | Fully enclosed structural crate | High | Limited | Brace internal components and rate the crate for handling loads. |
| Control industrial equipment and accessories | Crated industrial equipment with separate cartons | Medium | Usually non-stackable | Protect doors, controls, screens, and cable entries. |
| Large framed equipment system | Custom skid, frame, or partial enclosure | Low to medium | Non-stackable | Verify dimensions, center of gravity, and specialized handling. |
industrial equipment shipping options
Choosing a Shipping Method for Industrial Equipment
The right service depends on industrial equipment size, packaging, stackability, and handling needs.
| Industrial Equipment shipment | Common shipping option |
|---|---|
| Compact machine bolted to a standard skid | Standard LTL with weight review |
| Crated production or process equipment | Crated LTL |
| Tall control industrial equipment or framed system | No-top-load LTL |
| Oversized or unusually heavy equipment | Volume, flatbed, or dedicated service |
Large, irregular, non-stackable, unusually valuable, or specially handled industrial equipment shipments may need carrier review before booking.
Industrial Equipment Packaging, Stackability, and Damage Risk
Industrial Equipment Packaging
- Bolt the equipment to a weight-rated skid through approved mounting points.
- Brace moving assemblies, doors, guards, panels, and internal components before crating.
- Protect controls, connectors, hoses, sensors, and protruding fittings from impact.
Industrial Equipment Stackability
- Dense skidded machines usually require limited-stack handling unless fully enclosed.
- Structural crates may accept top load only when engineered and clearly marked.
- Treat tall industrial equipment, framed systems, and exposed equipment as non-stackable.
Industrial Equipment Stability, Precision, Lifting, and Control Protection
- Protect precision components, control panels, motors, bearings, sensors, and alignment points.
- Mark the center of gravity, lifting pockets, sling points, and no-fork zones clearly.
- Document equipment condition, loose accessories, declared value, and shutdown or fluid-preparation steps.
Before Requesting an Industrial Equipment Freight Quote
How to Measure a Packaged Industrial Equipment Shipment
- Measure after the skid, frame, crate, bracing, guards, and protective caps are installed.
- Include control boxes, motors, fittings, lifting lugs, protrusions, and pallet overhang.
- Use the total packaged weight of the equipment, accessories, skid, crate, and securement.
Industrial Equipment Freight Quote Checklist
- Measure the finished skid, crate, frame, or pallet containing the industrial equipment.
- Record the total packaged weight of the complete industrial-equipment shipment, including accessories.
- State whether the finished package has an engineered top surface or requires no-top-load handling.
- Include photos of mounting points, controls, protrusions, lifting pockets, bracing, and crate condition.
- Confirm forklift capacity, dock access, rigging, liftgate, and specialized-loading requirements.
Freight Planning Calculators
Calculate and Plan Your Industrial Equipment Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.