Compact industrial furnace
Dense refractory-lined unit secured to a reinforced skid
60 × 48 × 60 in
Packaged weight: 1,800 lb
- Cubic feet
- 100.00
- Density
- 18.00lb/cu ft
Estimated class
70
70
Industrial Furnace LTL Shipping Guide
Freight Class for Industrial Furnace
To estimate your shipment, use the Industrial Furnace Freight Class Calculator.
The Industrial Furnace Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 70 to 125.
These are density-based estimates.
Industrial Furnace density calculator
Calculate Your Industrial Furnace Freight Class
A crated heat-treat furnace is preloaded as an example. Adjust the packaged dimensions or weight to calculate your industrial furnace freight class.
Your result
Cubic feet
336.00
Density
13.39
lb/cu ft
Estimated freight class
85
This is an example density-based estimate. Update any field to calculate your shipment.
Industrial Furnace shipment examples
Industrial Furnace Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic industrial furnace shipment formats can produce different density-based class estimates.
Crated heat-treat furnace
Chamber, controls, burners, and doors protected
96 × 72 × 84 in
Packaged weight: 4,500 lb
- Cubic feet
- 336.00
- Density
- 13.39lb/cu ft
Estimated class
85
85
Large furnace section
Heavy insulated enclosure with broad non-stackable footprint
144 × 96 × 96 in
Packaged weight: 5,000 lb
- Cubic feet
- 768.00
- Density
- 6.51lb/cu ft
Estimated class
125
125
Industrial Furnace shipment comparison
Industrial Furnace Freight Class by Shipment Format
Industrial Furnace freight class can change with the enclosure size, coils or burners, fans, piping, insulation, protective clearance, and top-load restrictions. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Industrial Furnace shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact industrial furnace | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to higher | Limited | Dense refractory-lined unit secured to a reinforced skid; this example calculates to 18.00 lb/cu ft and Class 70. |
| Crated heat-treat furnace | Framed crate with internal restraint and protection for controls and moving parts | Medium to higher | Possible with engineered crate | Chamber, controls, burners, and doors protected; this example calculates to 13.39 lb/cu ft and Class 85. |
| Large furnace section | Elongated or oversized crate with structural bracing and protective clearance | Medium to lower | Usually non-stackable | Heavy insulated enclosure with broad non-stackable footprint; this example calculates to 6.51 lb/cu ft and Class 125. |
| Equipment with fans, controls, and accessories | Main equipment skid plus separately protected controls, panels, duct pieces, pumps, or piping components | Varies | Usually limited | Accessories and protective framing can materially change the final cubic volume and density. |
Industrial Furnace shipping options
Choosing a Shipping Method for Industrial Furnace
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Industrial Furnace shipment | Common shipping option |
|---|---|
| Compact industrial furnace | Standard LTL with packaging and handling review |
| Crated heat-treat furnace | LTL or volume service with weight and handling review |
| Large furnace section | LTL or volume service with weight and handling review |
| Equipment with fans, controls, and accessories | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent industrial furnace shipments may need carrier review before booking.
Industrial Furnace Packaging, Stackability, and Damage Risk
Industrial Furnace Packaging
- Secure the cabinet, vessel, or frame to a reinforced skid and brace tall or broad enclosures.
- Protect coils, burners, fans, doors, refractory, nozzles, piping stubs, and control panels from impact.
- Cap openings and keep loose filters, panels, duct pieces, sensors, and accessories restrained and labeled.
Industrial Furnace Stackability
- Treat equipment with fans, coils, vents, piping, or uneven roofs as non-stackable.
- Only use stackable status when a separate structural frame carries the load above the equipment.
- Keep lifting points, base rails, center-of-gravity marks, and upright instructions visible.
Industrial Furnace Fragility and Liability
- Protect thin fins, insulation, refractory, doors, seals, instruments, and control components from shock and weather.
- Drain or secure approved fluids and close all service connections before shipping.
- Confirm handling and liability requirements for large, high-value, or site-critical process equipment.
Before Requesting a Industrial Furnace Freight Quote
How to Measure a Packaged Industrial Furnace Shipment
- Measure after the industrial furnace is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Industrial Furnace Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Industrial Furnace Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.