Compact dust collector
Dense cabinet and fan secured to a pallet
72 × 48 × 72 in
Packaged weight: 1,200 lb
- Cubic feet
- 144.00
- Density
- 8.33lb/cu ft
Estimated class
100
100
Dust Collector LTL Shipping Guide
Freight Class for Dust Collector
To estimate your shipment, use the Dust Collector Freight Class Calculator.
The Dust Collector Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 100 to 250.
These are density-based estimates.
Dust Collector density calculator
Calculate Your Dust Collector Freight Class
A crated cartridge collector is preloaded as an example. Adjust the packaged dimensions or weight to calculate your dust collector freight class.
Your result
Cubic feet
480.00
Density
5.21
lb/cu ft
Estimated freight class
175
This is an example density-based estimate. Update any field to calculate your shipment.
Dust Collector shipment examples
Dust Collector Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic dust collector shipment formats can produce different density-based class estimates.
Crated cartridge collector
Housing, hopper, controls, and filters protected
120 × 72 × 96 in
Packaged weight: 2,500 lb
- Cubic feet
- 480.00
- Density
- 5.21lb/cu ft
Estimated class
175
175
Large dust collection module
Tall lightweight housing with broad non-stackable clearance
144 × 96 × 120 in
Packaged weight: 3,500 lb
- Cubic feet
- 960.00
- Density
- 3.65lb/cu ft
Estimated class
250
250
Dust Collector shipment comparison
Dust Collector Freight Class by Shipment Format
Dust Collector freight class can change with the enclosure size, coils or burners, fans, piping, insulation, protective clearance, and top-load restrictions. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Dust Collector shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact dust collector | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to lower | Limited | Dense cabinet and fan secured to a pallet; this example calculates to 8.33 lb/cu ft and Class 100. |
| Crated cartridge collector | Framed crate with internal restraint and protection for controls and moving parts | Lower | Possible with engineered crate | Housing, hopper, controls, and filters protected; this example calculates to 5.21 lb/cu ft and Class 175. |
| Large dust collection module | Elongated or oversized crate with structural bracing and protective clearance | Lower | Usually non-stackable | Tall lightweight housing with broad non-stackable clearance; this example calculates to 3.65 lb/cu ft and Class 250. |
| Equipment with fans, controls, and accessories | Main equipment skid plus separately protected controls, panels, duct pieces, pumps, or piping components | Varies | Usually limited | Accessories and protective framing can materially change the final cubic volume and density. |
Dust Collector shipping options
Choosing a Shipping Method for Dust Collector
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Dust Collector shipment | Common shipping option |
|---|---|
| Compact dust collector | Standard LTL with packaging and handling review |
| Crated cartridge collector | LTL with handling review or volume service |
| Large dust collection module | LTL or volume service with weight and handling review |
| Equipment with fans, controls, and accessories | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent dust collector shipments may need carrier review before booking.
Dust Collector Packaging, Stackability, and Damage Risk
Dust Collector Packaging
- Secure the cabinet, vessel, or frame to a reinforced skid and brace tall or broad enclosures.
- Protect coils, burners, fans, doors, refractory, nozzles, piping stubs, and control panels from impact.
- Cap openings and keep loose filters, panels, duct pieces, sensors, and accessories restrained and labeled.
Dust Collector Stackability
- Treat equipment with fans, coils, vents, piping, or uneven roofs as non-stackable.
- Only use stackable status when a separate structural frame carries the load above the equipment.
- Keep lifting points, base rails, center-of-gravity marks, and upright instructions visible.
Dust Collector Fragility and Liability
- Protect thin fins, insulation, refractory, doors, seals, instruments, and control components from shock and weather.
- Drain or secure approved fluids and close all service connections before shipping.
- Confirm handling and liability requirements for large, high-value, or site-critical process equipment.
Before Requesting a Dust Collector Freight Quote
How to Measure a Packaged Dust Collector Shipment
- Measure after the dust collector is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Dust Collector Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Dust Collector Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.