Compact strapping machine
Tabletop or cabinet machine secured to a pallet
48 × 40 × 48 in
Packaged weight: 750 lb
- Cubic feet
- 53.33
- Density
- 14.06lb/cu ft
Estimated class
85
85
Strapping Machine LTL Shipping Guide
Freight Class for Strapping Machine
To estimate your shipment, use the Strapping Machine Freight Class Calculator.
The Strapping Machine Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 85 to 175.
These are density-based estimates.
Strapping Machine density calculator
Calculate Your Strapping Machine Freight Class
A arch strapping machine is preloaded as an example. Adjust the packaged dimensions or weight to calculate your strapping machine freight class.
Your result
Cubic feet
144.00
Density
9.03
lb/cu ft
Estimated freight class
100
This is an example density-based estimate. Update any field to calculate your shipment.
Strapping Machine shipment examples
Strapping Machine Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic strapping machine shipment formats can produce different density-based class estimates.
Arch strapping machine
Arch, table, controls, and feed system protected
72 × 48 × 72 in
Packaged weight: 1,300 lb
- Cubic feet
- 144.00
- Density
- 9.03lb/cu ft
Estimated class
100
100
Large automatic strapper
Wide arch, conveyors, and guards in a larger crate
120 × 60 × 72 in
Packaged weight: 1,700 lb
- Cubic feet
- 300.00
- Density
- 5.67lb/cu ft
Estimated class
175
175
Strapping Machine shipment comparison
Strapping Machine Freight Class by Shipment Format
Strapping Machine freight class can change with the machine frame, product path, guards, controls, attached conveyors, protective clearance, and non-stackability. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Strapping Machine shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact strapping machine | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to higher | Limited | Tabletop or cabinet machine secured to a pallet; this example calculates to 14.06 lb/cu ft and Class 85. |
| Arch strapping machine | Framed crate with internal restraint and protection for controls and moving parts | Medium to lower | Possible with engineered crate | Arch, table, controls, and feed system protected; this example calculates to 9.03 lb/cu ft and Class 100. |
| Large automatic strapper | Elongated or oversized crate with structural bracing and protective clearance | Lower | Usually non-stackable | Wide arch, conveyors, and guards in a larger crate; this example calculates to 5.67 lb/cu ft and Class 175. |
| Machine with infeed, discharge, and controls | Main machine skid plus separately blocked conveyors, controls, guards, tooling, and change parts | Varies | Usually limited | Line components can increase the footprint and should be measured as shipped, not as installed. |
Strapping Machine shipping options
Choosing a Shipping Method for Strapping Machine
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Strapping Machine shipment | Common shipping option |
|---|---|
| Compact strapping machine | Standard LTL with packaging and handling review |
| Arch strapping machine | Standard LTL with packaging and handling review |
| Large automatic strapper | LTL with handling review or volume service |
| Machine with infeed, discharge, and controls | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent strapping machine shipments may need carrier review before booking.
Strapping Machine Packaging, Stackability, and Damage Risk
Strapping Machine Packaging
- Bolt the base or frame to a reinforced skid and brace tall masts, arches, heads, or rotary assemblies.
- Restrain conveyors, film carriages, filling heads, label applicators, guards, and other moving components.
- Protect controls, sensors, nozzles, rollers, wiring, and product-contact surfaces from impact and contamination.
Strapping Machine Stackability
- Treat tall masts, arches, open frames, and machines with attached conveyors as non-stackable.
- Use a framed crate with a load-bearing roof only when stacking has been specifically engineered.
- Keep access to lift points, fork pockets, and center-of-gravity markings unobstructed.
Strapping Machine Fragility and Liability
- Prevent frame twist and protect alignment-sensitive heads, rails, rollers, and product-handling components.
- Drain or secure approved fluids and package change parts, tooling, and controls separately within the shipment.
- Confirm declared value and coverage for integrated or production-critical packaging equipment.
Before Requesting a Strapping Machine Freight Quote
How to Measure a Packaged Strapping Machine Shipment
- Measure after the strapping machine is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Strapping Machine Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Strapping Machine Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.