Compact hydraulic press
Dense frame and ram secured to a heavy-duty skid
48 × 40 × 48 in
Packaged weight: 5,000 lb
- Cubic feet
- 53.33
- Density
- 93.75lb/cu ft
Estimated class
50
50
Hydraulic Press LTL Shipping Guide
Freight Class for Hydraulic Press
To estimate your shipment, use the Hydraulic Press Freight Class Calculator.
The Hydraulic Press Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 50 to 92.5.
These are density-based estimates.
Hydraulic Press density calculator
Calculate Your Hydraulic Press Freight Class
A crated shop press is preloaded as an example. Adjust the packaged dimensions or weight to calculate your hydraulic press freight class.
Your result
Cubic feet
384.00
Density
26.04
lb/cu ft
Estimated freight class
65
This is an example density-based estimate. Update any field to calculate your shipment.
Hydraulic Press shipment examples
Hydraulic Press Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic hydraulic press shipment formats can produce different density-based class estimates.
Crated shop press
Press frame, hydraulic unit, controls, and guards protected
96 × 72 × 96 in
Packaged weight: 10,000 lb
- Cubic feet
- 384.00
- Density
- 26.04lb/cu ft
Estimated class
65
65
Large hydraulic press frame
Tall concentrated load requiring engineered blocking
144 × 96 × 120 in
Packaged weight: 10,000 lb
- Cubic feet
- 960.00
- Density
- 10.42lb/cu ft
Estimated class
92.5
92.5
Hydraulic Press shipment comparison
Hydraulic Press Freight Class by Shipment Format
Hydraulic Press freight class can change with the concentrated weight, frame geometry, flywheels or hydraulic units, protective clearance, and rigging requirements. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Hydraulic Press shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact hydraulic press | Reinforced pallet or skid with blocking, restraint, and weather protection | Higher | Limited | Dense frame and ram secured to a heavy-duty skid; this example calculates to 93.75 lb/cu ft and Class 50. |
| Crated shop press | Framed crate with internal restraint and protection for controls and moving parts | Medium to higher | Possible with engineered crate | Press frame, hydraulic unit, controls, and guards protected; this example calculates to 26.04 lb/cu ft and Class 65. |
| Large hydraulic press frame | Elongated or oversized crate with structural bracing and protective clearance | Medium to lower | Usually non-stackable | Tall concentrated load requiring engineered blocking; this example calculates to 10.42 lb/cu ft and Class 92.5. |
| Machine with power unit, controls, and auxiliaries | Main machine base plus separately blocked controls, guards, feeders, power equipment, and tooling | Varies | Usually limited | Concentrated weight and multiple pieces may require carrier review before pickup. |
Hydraulic Press shipping options
Choosing a Shipping Method for Hydraulic Press
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Hydraulic Press shipment | Common shipping option |
|---|---|
| Compact hydraulic press | LTL or volume service with weight and handling review |
| Crated shop press | Partial truckload, volume LTL, or specialized service |
| Large hydraulic press frame | Partial truckload, volume LTL, or specialized service |
| Machine with power unit, controls, and auxiliaries | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent hydraulic press shipments may need carrier review before booking.
Hydraulic Press Packaging, Stackability, and Damage Risk
Hydraulic Press Packaging
- Use an engineered skid or base that distributes the concentrated load and preserves documented lift points.
- Lock rams, platens, slides, clamps, screws, flywheels, and other moving assemblies for transport.
- Protect controls, guards, hoses, fittings, tie bars, barrels, and precision surfaces from impact and contamination.
Hydraulic Press Stackability
- Heavy presses and long production machines are normally non-stackable unless enclosed in engineered structural framing.
- Keep rigging points, fork pockets, center-of-gravity marks, and prohibited lift areas visible.
- Confirm floor loading and carrier equipment limits before tendering unusually concentrated freight.
Hydraulic Press Fragility and Liability
- Prevent movement of heavy internal assemblies that could shift the center of gravity or damage alignment.
- Secure hydraulic power units, control cabinets, feeders, molds, dies, and auxiliary equipment as separate listed pieces.
- Review declared value, liability, and specialized handling for production-critical machinery.
Before Requesting a Hydraulic Press Freight Quote
How to Measure a Packaged Hydraulic Press Shipment
- Measure after the hydraulic press is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Hydraulic Press Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Hydraulic Press Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.