Compact extruder skid
Dense drive, barrel, and controls secured together
120 × 60 × 72 in
Packaged weight: 7,000 lb
- Cubic feet
- 300.00
- Density
- 23.33lb/cu ft
Estimated class
65
65
Extrusion Machine LTL Shipping Guide
Freight Class for Extrusion Machine
To estimate your shipment, use the Extrusion Machine Freight Class Calculator.
The Extrusion Machine Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 65 to 100.
These are density-based estimates.
Extrusion Machine density calculator
Calculate Your Extrusion Machine Freight Class
A crated extrusion machine is preloaded as an example. Adjust the packaged dimensions or weight to calculate your extrusion machine freight class.
Your result
Cubic feet
540.00
Density
16.67
lb/cu ft
Estimated freight class
70
This is an example density-based estimate. Update any field to calculate your shipment.
Extrusion Machine shipment examples
Extrusion Machine Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic extrusion machine shipment formats can produce different density-based class estimates.
Crated extrusion machine
Extruder, gearbox, controls, and guards in a framed crate
180 × 72 × 72 in
Packaged weight: 9,000 lb
- Cubic feet
- 540.00
- Density
- 16.67lb/cu ft
Estimated class
70
70
Long extrusion line section
Extended barrel and frame with protective clearance
240 × 96 × 84 in
Packaged weight: 9,000 lb
- Cubic feet
- 1120.00
- Density
- 8.04lb/cu ft
Estimated class
100
100
Extrusion Machine shipment comparison
Extrusion Machine Freight Class by Shipment Format
Extrusion Machine freight class can change with the concentrated weight, frame geometry, flywheels or hydraulic units, protective clearance, and rigging requirements. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Extrusion Machine shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact extruder skid | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to higher | Limited | Dense drive, barrel, and controls secured together; this example calculates to 23.33 lb/cu ft and Class 65. |
| Crated extrusion machine | Framed crate with internal restraint and protection for controls and moving parts | Medium to higher | Possible with engineered crate | Extruder, gearbox, controls, and guards in a framed crate; this example calculates to 16.67 lb/cu ft and Class 70. |
| Long extrusion line section | Elongated or oversized crate with structural bracing and protective clearance | Medium to lower | Usually non-stackable | Extended barrel and frame with protective clearance; this example calculates to 8.04 lb/cu ft and Class 100. |
| Machine with power unit, controls, and auxiliaries | Main machine base plus separately blocked controls, guards, feeders, power equipment, and tooling | Varies | Usually limited | Concentrated weight and multiple pieces may require carrier review before pickup. |
Extrusion Machine shipping options
Choosing a Shipping Method for Extrusion Machine
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Extrusion Machine shipment | Common shipping option |
|---|---|
| Compact extruder skid | Partial truckload, volume LTL, or specialized service |
| Crated extrusion machine | Partial truckload, volume LTL, or specialized service |
| Long extrusion line section | Dedicated, specialized heavy-haul, or project-freight service |
| Machine with power unit, controls, and auxiliaries | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent extrusion machine shipments may need carrier review before booking.
Extrusion Machine Packaging, Stackability, and Damage Risk
Extrusion Machine Packaging
- Use an engineered skid or base that distributes the concentrated load and preserves documented lift points.
- Lock rams, platens, slides, clamps, screws, flywheels, and other moving assemblies for transport.
- Protect controls, guards, hoses, fittings, tie bars, barrels, and precision surfaces from impact and contamination.
Extrusion Machine Stackability
- Heavy presses and long production machines are normally non-stackable unless enclosed in engineered structural framing.
- Keep rigging points, fork pockets, center-of-gravity marks, and prohibited lift areas visible.
- Confirm floor loading and carrier equipment limits before tendering unusually concentrated freight.
Extrusion Machine Fragility and Liability
- Prevent movement of heavy internal assemblies that could shift the center of gravity or damage alignment.
- Secure hydraulic power units, control cabinets, feeders, molds, dies, and auxiliary equipment as separate listed pieces.
- Review declared value, liability, and specialized handling for production-critical machinery.
Before Requesting a Extrusion Machine Freight Quote
How to Measure a Packaged Extrusion Machine Shipment
- Measure after the extrusion machine is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Extrusion Machine Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Extrusion Machine Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.