Compact boxed cylinders
Dense replacement cylinders in cartons
36 × 30 × 18 in
Packaged weight: 650 lb
- Cubic feet
- 11.25
- Density
- 57.78 lb/cu ft
Estimated class
Density-based
50
Hydraulic Cylinder LTL Shipping Guide
Freight Class for Hydraulic Cylinders
To estimate your shipment, use the Hydraulic Cylinders Freight Class Calculator.
The Hydraulic Cylinders Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 50 to 60.
These are density-based estimates.
Hydraulic Cylinders density calculator
Calculate Your Hydraulic Cylinders Freight Class
A palletized hydraulic-cylinder shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your hydraulic cylinder freight class.
Your result
Cubic feet
26.67
Density
37.50
lb/cu ft
Estimated freight class
55
This is an example density-based estimate. Update any field to calculate your shipment.
Hydraulic Cylinders shipment examples
Hydraulic Cylinders Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all hydraulic cylinder shipments.
Palletized cylinder set
Several cylinders blocked on a skid
48 × 40 × 24 in
Packaged weight: 1000 lb
- Cubic feet
- 26.67
- Density
- 37.50 lb/cu ft
Estimated class
Density-based
55
Long crated cylinder
Extended cylinder in a custom long crate
72 × 24 × 24 in
Packaged weight: 800 lb
- Cubic feet
- 24.00
- Density
- 33.33 lb/cu ft
Estimated class
Density-based
60
Hydraulic Cylinders shipment comparison
Hydraulic Cylinders Freight Class by Shipment Type
Hydraulic cylinders are dense but often long, round, and vulnerable at exposed rods, ports, clevises, and seals. Cylinder length, rod extension, fluid preparation, center of gravity, crating, and bundle stability determine the final cube and handling method.
| Hydraulic Cylinders shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact replacement cylinders | Reinforced cartons or small skids | Very high | Usually stackable | Cap ports and immobilize rods and clevises. |
| Multiple cylinders on a pallet | Blocked and strapped to a reinforced skid | Very high | Limited | Use saddles or chocks to prevent rolling. |
| Long hydraulic cylinder | Custom long crate or extended skid | High | Limited | Support the barrel and rod at multiple points. |
| Large bore or custom cylinder | Heavy crate with engineered lifting points | High | Non-stackable | Document center of gravity, oil status, and lifting method. |
hydraulic cylinder shipping options
Choosing a Shipping Method for Hydraulic Cylinders
The right service depends on hydraulic cylinder size, packaging, stackability, and handling needs.
| Hydraulic Cylinders shipment | Common shipping option |
|---|---|
| Boxed compact hydraulic cylinder | Standard LTL |
| Multiple cylinders on a reinforced pallet | Heavy LTL |
| Long or exposed-rod cylinder | Crated LTL |
| Oversized custom hydraulic cylinder | Specialized or dedicated service |
Large, irregular, non-stackable, unusually valuable, or specially handled hydraulic cylinder shipments may need carrier review before booking.
Hydraulic Cylinders Packaging, Stackability, and Damage Risk
Hydraulic Cylinders Packaging
- Cap all hydraulic ports and protect rods, seals, threads, clevises, pins, and fittings.
- Use saddles, chocks, blocking, and straps to prevent cylinders from rolling or shifting.
- Support long barrels and rods at multiple points inside a weight-rated crate or extended skid.
Hydraulic Cylinders Stackability
- Compact boxed cylinders may stack when cartons and pallets are rated for dense weight.
- Round cylinders on open skids require limited stacking unless fully framed.
- Treat long, large-bore, or exposed-rod cylinders as non-stackable.
Hydraulic Cylinder Rod, Seal, Port, and Rolling Protection
- Prevent rod scoring, seal damage, port breakage, thread impact, rolling, and residual-fluid leakage.
- Keep straps, chains, and forks away from polished rods and hydraulic fittings.
- Document rod position, oil status, center of gravity, lifting points, and declared value.
Before Requesting a Hydraulic Cylinders Freight Quote
How to Measure a Packaged Hydraulic Cylinders Shipment
- Measure after rod covers, port caps, saddles, blocking, straps, and crate panels are installed.
- Include extended rods, clevises, pins, fittings, lifting eyes, and skid overhang.
- Use the total packaged weight of all cylinders, residual fluid, accessories, skid, and crate.
Hydraulic Cylinders Freight Quote Checklist
- Measure the finished pallet, extended skid, bundle, or crate containing the hydraulic cylinders.
- Record the total packaged weight of the complete hydraulic-cylinder shipment, including pins and accessories.
- State whether the package has a rigid top frame or requires no-top-load handling.
- Include photos of rods, seals, ports, clevises, saddles, blocking, straps, and lifting points.
- Confirm oil preparation, forklift capacity, crane loading, liftgate, and no-top-load requirements.
Freight Planning Calculators
Calculate and Plan Your Hydraulic Cylinders Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.