Dense boxed pump
Compact pump in a reinforced carton
36 × 30 × 24 in
Packaged weight: 800 lb
- Cubic feet
- 15.00
- Density
- 53.33 lb/cu ft
Estimated class
Density-based
50
Hydraulic Pump LTL Shipping Guide
Freight Class for Hydraulic Pumps
To estimate your shipment, use the Hydraulic Pumps Freight Class Calculator.
The Hydraulic Pumps Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 50 to 70.
These are density-based estimates.
Hydraulic Pumps density calculator
Calculate Your Hydraulic Pumps Freight Class
A palletized hydraulic pump shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your hydraulic pump freight class.
Your result
Cubic feet
40.00
Density
32.50
lb/cu ft
Estimated freight class
60
This is an example density-based estimate. Update any field to calculate your shipment.
Hydraulic Pumps shipment examples
Hydraulic Pumps Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all hydraulic pump shipments.
Palletized power unit
Pump, motor, and reservoir on a skid
48 × 40 × 36 in
Packaged weight: 1300 lb
- Cubic feet
- 40.00
- Density
- 32.50 lb/cu ft
Estimated class
Density-based
60
Crated pump assembly
Large hydraulic pump package in a crate
60 × 48 × 48 in
Packaged weight: 1600 lb
- Cubic feet
- 80.00
- Density
- 20.00 lb/cu ft
Estimated class
Density-based
70
Hydraulic Pumps shipment comparison
Hydraulic Pumps Freight Class by Shipment Type
Hydraulic pumps and power units are often dense, but motors, reservoirs, manifolds, hoses, guards, and residual fluid can create irregular packages. Port protection, oil preparation, concentrated weight, center of gravity, and securement determine the finished handling profile.
| Hydraulic Pumps shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact boxed hydraulic pump | Reinforced carton or small skid | Very high | Usually stackable | Cap ports and immobilize shafts and couplings. |
| Palletized pump and motor | Bolted to a reinforced skid | Very high | Limited | Distribute concentrated weight and protect the motor fan cover. |
| Hydraulic power unit | Skid with reservoir, manifold, and controls | High | Limited | Secure hoses, gauges, filters, and reservoir fittings. |
| Large pump assembly | Heavy crate with engineered lifting points | High | Non-stackable | Document oil status, center of gravity, and lifting method. |
hydraulic pump shipping options
Choosing a Shipping Method for Hydraulic Pumps
The right service depends on hydraulic pump size, packaging, stackability, and handling needs.
| Hydraulic Pumps shipment | Common shipping option |
|---|---|
| Boxed compact hydraulic pump | Standard LTL |
| Palletized pump and motor assembly | Heavy LTL |
| Skidded hydraulic power unit | LTL with no-top-load review |
| Large crated hydraulic pump package | Specialized or dedicated service |
Large, irregular, non-stackable, unusually valuable, or specially handled hydraulic pump shipments may need carrier review before booking.
Hydraulic Pumps Packaging, Stackability, and Damage Risk
Hydraulic Pumps Packaging
- Bolt pumps and power units to a reinforced skid or contain them in a weight-rated crate.
- Cap ports and protect shafts, couplings, seals, gauges, manifolds, filters, and controls.
- Drain or secure hydraulic fluid as required and restrain hoses, guards, and loose accessories.
Hydraulic Pumps Stackability
- Compact boxed pumps may stack when cartons and pallets are rated for concentrated weight.
- Motor-driven pumps and power units usually require limited stacking.
- Treat reservoir-equipped or irregular pump assemblies as non-stackable unless fully framed.
Hydraulic Pump Shaft, Port, Fluid, and Control Protection
- Prevent shaft bending, seal damage, broken ports, gauge impact, motor-cover damage, and fluid leakage.
- Keep straps, chains, and forks away from couplings, filters, hoses, controls, and reservoir fittings.
- Document oil status, lifting points, center of gravity, electrical controls, and declared value.
Before Requesting a Hydraulic Pumps Freight Quote
How to Measure a Packaged Hydraulic Pumps Shipment
- Measure after the skid, blocking, port caps, hose restraint, guards, and crate panels are installed.
- Include motors, reservoirs, filters, manifolds, controls, hoses, lifting lugs, and pallet overhang.
- Use the total packaged weight of the pump, motor, residual fluid, accessories, skid, and crate.
Hydraulic Pumps Freight Quote Checklist
- Measure the finished pallet, skid, or crate containing the hydraulic pump or power unit.
- Record the total packaged weight of the complete hydraulic-pump package, including motor and reservoir.
- State whether the package has a rated top frame or requires no-top-load handling.
- Include photos of shafts, ports, hoses, filters, gauges, controls, reservoir fittings, and securement.
- Confirm fluid preparation, forklift capacity, crane loading, liftgate, and loading-dock requirements.
Freight Planning Calculators
Calculate and Plan Your Hydraulic Pumps Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.