To estimate your shipment, use the Industrial Hose Freight Class Calculator.
The Industrial Hose Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 60 to 250.
These are density-based estimates.
Industrial Hose density calculator
A mixed industrial hose pallet example is loaded. Adjust the packaged dimensions or weight to calculate your industrial hose freight class.
Your result
Cubic feet
44.44
Density
11.25
lb/cu ft
92.5
Example density-based estimate. Update any field to calculate your shipment.
Industrial Hose shipment examples
These examples use finished packaged dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for every industrial hose shipment.
Wire-reinforced rubber hose tightly coiled and boxed
48 × 40 × 24 in
Packaged weight: 900 lb
Estimated class
Density-based
60
Dense rubber walls and wire reinforcement add substantial weight without requiring a tall pallet, producing a lower density-based class.
Multiple hose types layered, banded, and wrapped
48 × 40 × 40 in
Packaged weight: 500 lb
Estimated class
Density-based
92.5
Mixed diameters and coil stiffness create voids between layers, so the pallet occupies more cube relative to its weight.
Lightweight duct or ventilation hose in expanded coils
60 × 48 × 48 in
Packaged weight: 300 lb
Estimated class
Density-based
250
Large, lightweight hose must maintain a broad coil diameter, creating substantial occupied cube and a higher density-based class.
Industrial Hose shipment comparison
Industrial hose freight class changes with hose construction and finished packaging. Dense wire-reinforced coils may ship compactly, while large-diameter suction, discharge, or duct hose can occupy substantially more pallet or reel space for the same weight.
| Industrial Hose shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Dense reinforced hose coils | Banded coils in reinforced cartons or on a pallet | High | Usually stackable when boxed | Thick rubber walls and wire reinforcement can create a compact, heavy package. |
| Mixed industrial hose coils | Layered, banded, and wrapped pallet | Medium | Limited | Different diameters, stiffness, and bend radii leave unused space between coils. |
| Large-diameter suction or discharge hose | Oversized coil, reel, or supported pallet | Low to medium | Usually non-stackable | Minimum bend radius and coil diameter often determine the occupied footprint. |
| Lightweight duct or ventilation hose | Cartons, crate, or expanded coils | Low | Depends on container strength | Bulky hose can produce a high class even when the packaged weight is modest. |
Industrial Hose shipping options
Choose the service around finished coil or reel dimensions, packaged density, hose value, contamination requirements, and whether the load can safely support freight above it.
| Industrial Hose shipment | Common shipping option |
|---|---|
| Compact reinforced coils in strong cartons or on a standard pallet | Standard LTL |
| Mixed coils on a secured pallet with a protected top | LTL with stackability confirmation |
| Large-diameter suction or discharge hose on an oversized pallet or reel | LTL or volume service with exact dimensions |
| Bulky duct hose, oversized reels, or high-value specialty hose | Volume, crated LTL, or specialized handling |
Oversized coil diameters, reel flanges, loose ends, contamination-sensitive hose, and non-stackable pallets should be described before booking.
Freight Planning Calculators
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Estimate freight class from packaged dimensions, weight, and density.
Calculate cubic feet and pounds per cubic foot for packaged freight.
Plan pallet dimensions, shipment weight, density, and configuration.
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.