Estimated class examples
Class 70–200
Based on the sample shipments below
Hose LTL Shipping Guide
Freight Class for Hose
Hose freight class commonly ranges from Class 70 to Class 200 in the examples below.
Dense boxed hose
Class 70
Coiled hose pallet
Class 125
Lightweight hose crate
Class 200
These are density-based examples. Your final estimate depends on the finished packaged dimensions, total weight, coil or reel configuration, stackability, fittings, value, and handling requirements.
Main class factor
Packaged density
Final dimensions and total weight
Assembly effect
Tight coils ship denser
Coiled hose pallet occupy more space
Carrier review
Stackability and damage risk
Fittings, reels, and exposed couplings
Hose density calculator
Calculate Your Hose Freight Class
Example palletized coiled-hose shipment loaded. Adjust the dimensions or weight to calculate your hose freight class.
Your result
Cubic feet
53.33
Density
12.19
lb/cu ft
Estimated freight class
85
Example density-based estimate. Update any field to calculate your shipment.
Hose shipment comparison
Hose Freight Class by Shipment Format
Hose freight class can change substantially depending on whether the product is tightly boxed, coiled on a pallet, shipped on a reel, or supplied as a finished assembly. Compact cartons and tightly nested coils tend to produce denser estimates, while reels, loose coils, and lightweight duct hose occupy more cubic space.
| Hose shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Dense boxed hose on a standard pallet | Standard LTL | |||
| Band-secured coils with a flat protected top | LTL with stackability confirmation | |||
| Large reels or exposed hose assemblies | Crated or skidded LTL with handling review | |||
| Oversized, non-stackable hose reels | Volume, linear-foot, or dedicated service |
Hose shipping options
Choosing a Shipping Method for Hose
The right service depends on hose size, packaging, stackability, and handling needs.
| Hose shipment | Common shipping option |
|---|---|
| Flat-packed cartons on a standard pallet | Standard LTL |
| Coiled hose pallet on a reinforced pallet | LTL with stackability review |
| Tall, fragile, or custom hose | Crated LTL or specialized service |
| Oversized hosery or millwork | Volume, linear-foot, or dedicated service |
Large reels, non-stackable coils, exposed fittings, or oversized hose assemblies may need carrier review before booking.
Hose shipment examples
Hose Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all hose shipments.
Dense boxed hydraulic hose
Dense reinforced hose in cartons
48 × 40 × 24 in
Packaged weight: 900 lb
- Cubic feet
- 26.67
- Density
- 33.75 lb/cu ft
Estimated class
Density-based
70
Assembled base hose
Band-secured coils on a pallet
48 × 40 × 48 in
Packaged weight: 650 lb
- Cubic feet
- 53.33
- Density
- 12.19 lb/cu ft
Estimated class
Density-based
85
Lightweight duct hose crate
Bulky low-density duct hose
48 × 40 × 72 in
Packaged weight: 350 lb
- Cubic feet
- 80.00
- Density
- 4.38 lb/cu ft
Estimated class
Density-based
200
Hose Packaging, Stackability, and Damage Risk
Hose Packaging
- Cap or wrap hose ends, fittings, and couplings.
- Band coils tightly and block reels against rolling.
- Keep coils, fittings, and reel flanges inside the pallet footprint.
Hose Stackability
- Dense cartons are usually the easiest hose format to stack.
- Use a rigid top deck before allowing freight above coils.
- Treat exposed reels and irregular assemblies as non-stackable when needed.
Hose Fragility and Liability
- Protect crimped fittings, flanges, nozzles, and threaded ends.
- Use blocking or crating for heavy reels and high-value assemblies.
- Disclose unusually high-value, pressure-tested, or contamination-sensitive hose.
Before Requesting a Hose Freight Quote
How to Measure a Packaged Hose Shipment
- Measure after coiling, boxing, palletizing, blocking, or crating is complete.
- Include the pallet, reel flanges, blocks, caps, and protective clearance.
- Measure to the widest point of the coil, reel, fittings, or pallet overhang.
Hose Freight Quote Checklist
- Measure the finished carton, pallet, skid, reel, or crate.
- Record the total packaged weight.
- State whether the shipment has a flat, load-bearing top.
- Include photos of reels, exposed fittings, and unusual assemblies.
- Confirm liftgate, forklift, dock, or reel-handling requirements.
Freight Planning Calculators
Calculate and Plan Your Hose Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping.
NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.