To estimate your shipment, use the Garden Hose Freight Class Calculator.
The Garden Hose Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 65 to 200.
These are density-based estimates.
Garden Hose density calculator
A palletized garden hose coil example is loaded. Adjust the packaged dimensions or weight to calculate your garden hose freight class.
Your result
Cubic feet
53.33
Density
9.38
lb/cu ft
100
Example density-based estimate. Update any field to calculate your shipment.
Garden Hose shipment examples
These examples use finished packaged dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for every garden hose shipment.
Rubber and vinyl hose coils packed in full cases
48 × 40 × 24 in
Packaged weight: 700 lb
Estimated class
Density-based
65
Closely packed retail cartons create a compact pallet with relatively high weight, producing a lower density-based class.
Bulk coils layered with dividers and stretch wrap
48 × 40 × 48 in
Packaged weight: 500 lb
Estimated class
Density-based
100
Round coils and mixed diameters leave voids between layers, increasing pallet height and reducing density.
Lightweight hose in tall retail-ready cases
48 × 40 × 60 in
Packaged weight: 300 lb
Estimated class
Density-based
200
The product is light relative to the carton and pallet cube, so the shipment reaches a higher density-based class.
Garden Hose shipment comparison
Garden hose freight class changes with retail packaging and construction. Closely packed cartons can be dense, while loosely stacked coils, display-ready packaging, and lightweight expandable hose can use more cube for the same weight.
| Garden Hose shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Retail-cartoned garden hose | Cases on a standard pallet | High | Usually stackable | Fully filled cartons create a consistent, compact pallet. |
| Bulk garden hose coils | Layered, banded, and wrapped pallet | Medium | Limited | Round coils leave voids and may shift without dividers. |
| Garden hose on reels or carts | Retail boxes, crates, or supported pallet | Medium to low | Usually non-stackable | Handles, wheels, and frames determine the outside dimensions. |
| Lightweight expandable hose | Retail cartons or display cases | Low to medium | Depends on carton strength | Light products can produce a higher class when cartons occupy substantial cube. |
Garden Hose shipping options
Choose the service around retail carton strength, pallet height, coil or reel dimensions, packaged density, seasonal display packaging, and whether the load can safely support top freight.
| Garden Hose shipment | Common shipping option |
|---|---|
| Fully cartoned garden hose on a standard pallet | Standard LTL |
| Bulk coils on a secured pallet with dividers or a top deck | LTL with stackability confirmation |
| Hose reels, carts, or display-ready pallet loads | LTL or volume service with exact dimensions |
| Lightweight expandable hose in tall retail cartons | Standard or volume LTL based on density and stackability |
Retail carton overhang, display trays, protruding reel handles, soft coils, and partially filled cases should be described before booking.
Freight Planning Calculators
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Estimate freight class from packaged dimensions, weight, and density.
Calculate cubic feet and pounds per cubic foot for packaged freight.
Plan pallet dimensions, shipment weight, density, and configuration.
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.