Bench drill press pallet
Compact press boxed and secured to a pallet
48 × 40 × 48 in
Packaged weight: 900 lb
- Cubic feet
- 53.33
- Density
- 16.88lb/cu ft
Estimated class
70
70
Drill Press LTL Shipping Guide
Freight Class for Drill Press
To estimate your shipment, use the Drill Press Freight Class Calculator.
The Drill Press Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 70 to 100.
These are density-based estimates.
Drill Press density calculator
Calculate Your Drill Press Freight Class
A floor drill press crate is preloaded as an example. Adjust the packaged dimensions or weight to calculate your drill press freight class.
Your result
Cubic feet
130.00
Density
11.54
lb/cu ft
Estimated freight class
92.5
This is an example density-based estimate. Update any field to calculate your shipment.
Drill Press shipment examples
Drill Press Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic drill press shipment formats can produce different density-based class estimates.
Floor drill press crate
Tall column and head protected inside a framed crate
60 × 48 × 78 in
Packaged weight: 1,500 lb
- Cubic feet
- 130.00
- Density
- 11.54lb/cu ft
Estimated class
92.5
92.5
Multiple drill presses
Mixed press sizes consolidated with added clearance
84 × 60 × 72 in
Packaged weight: 1,800 lb
- Cubic feet
- 210.00
- Density
- 8.57lb/cu ft
Estimated class
100
100
Drill Press shipment comparison
Drill Press Freight Class by Shipment Format
Drill Press freight class can change with the finished skid or crate, machine footprint, concentrated weight, protective clearance, and non-stackability. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Drill Press shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Bench drill press pallet | Reinforced pallet or skid with blocking, restraint, and weather protection | Medium to higher | Limited | Compact press boxed and secured to a pallet; this example calculates to 16.88 lb/cu ft and Class 70. |
| Floor drill press crate | Framed crate with internal restraint and protection for controls and moving parts | Medium to lower | Possible with engineered crate | Tall column and head protected inside a framed crate; this example calculates to 11.54 lb/cu ft and Class 92.5. |
| Multiple drill presses | Elongated or oversized crate with structural bracing and protective clearance | Medium to lower | Usually non-stackable | Mixed press sizes consolidated with added clearance; this example calculates to 8.57 lb/cu ft and Class 100. |
| Machine with detached controls and accessories | Main machine skid plus separately blocked controls, tooling, guards, and auxiliary equipment | Varies | Usually limited | List every detached component and include it inside the final packaged dimensions and weight. |
Drill Press shipping options
Choosing a Shipping Method for Drill Press
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Drill Press shipment | Common shipping option |
|---|---|
| Bench drill press pallet | Standard LTL with packaging and handling review |
| Floor drill press crate | Standard LTL with packaging and handling review |
| Multiple drill presses | LTL with handling review or volume service |
| Machine with detached controls and accessories | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent drill press shipments may need carrier review before booking.
Drill Press Packaging, Stackability, and Damage Risk
Drill Press Packaging
- Bolt the machine to a reinforced skid engineered for concentrated weight and the documented lifting points.
- Immobilize tables, heads, slides, doors, tool changers, and other moving assemblies before transport.
- Protect controls, precision surfaces, spindles, ways, and projecting components from impact, moisture, and contamination.
Drill Press Stackability
- Treat open skids and machines with projecting controls or uneven tops as non-stackable.
- Only mark a crate stackable when its roof and side framing are engineered to carry freight above it.
- Keep forklift pockets, rigging points, and center-of-gravity markings visible for safe handling.
Drill Press Fragility and Liability
- Protect precision alignment, bearings, guides, controls, and machined surfaces from shock and vibration.
- Drain or secure approved fluids and restrain detached tooling, guards, chip conveyors, and accessories.
- Confirm declared value and coverage for high-value, custom, imported, obsolete, or difficult-to-replace equipment.
Before Requesting a Drill Press Freight Quote
How to Measure a Packaged Drill Press Shipment
- Measure after the drill press is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Drill Press Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Drill Press Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.