Dock leveler deck
Dense steel deck and frame secured flat on a skid
96 × 84 × 24 in
Packaged weight: 4,500 lb
- Cubic feet
- 112.00
- Density
- 40.18lb/cu ft
Estimated class
55
55
Dock Leveler LTL Shipping Guide
Freight Class for Dock Leveler
To estimate your shipment, use the Dock Leveler Freight Class Calculator.
The Dock Leveler Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 55 to 85.
These are density-based estimates.
Dock Leveler density calculator
Calculate Your Dock Leveler Freight Class
A crated dock leveler assembly is preloaded as an example. Adjust the packaged dimensions or weight to calculate your dock leveler freight class.
Your result
Cubic feet
288.00
Density
20.83
lb/cu ft
Estimated freight class
70
This is an example density-based estimate. Update any field to calculate your shipment.
Dock Leveler shipment examples
Dock Leveler Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic dock leveler shipment formats can produce different density-based class estimates.
Crated dock leveler assembly
Deck, frame, hydraulics, and controls protected
96 × 72 × 72 in
Packaged weight: 6,000 lb
- Cubic feet
- 288.00
- Density
- 20.83lb/cu ft
Estimated class
70
70
Large dock leveler package
Leveler, bumpers, controls, and frame consolidated
120 × 96 × 72 in
Packaged weight: 6,500 lb
- Cubic feet
- 480.00
- Density
- 13.54lb/cu ft
Estimated class
85
85
Dock Leveler shipment comparison
Dock Leveler Freight Class by Shipment Format
Dock Leveler freight class can change with the transport position, frame length, hydraulic or drive components, attachments, protective clearance, and loading method. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Dock Leveler shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Dock leveler deck | Reinforced pallet or skid with blocking, restraint, and weather protection | Higher | Limited | Dense steel deck and frame secured flat on a skid; this example calculates to 40.18 lb/cu ft and Class 55. |
| Crated dock leveler assembly | Framed crate with internal restraint and protection for controls and moving parts | Medium to higher | Possible with engineered crate | Deck, frame, hydraulics, and controls protected; this example calculates to 20.83 lb/cu ft and Class 70. |
| Large dock leveler package | Elongated or oversized crate with structural bracing and protective clearance | Medium to higher | Usually non-stackable | Leveler, bumpers, controls, and frame consolidated; this example calculates to 13.54 lb/cu ft and Class 85. |
| Equipment with attachments and controls | Main equipment unit plus separately restrained attachments, controls, chains, cables, guards, or hydraulic parts | Varies | Usually limited | Transport dimensions may differ greatly from operating dimensions, so measure only after securement. |
Dock Leveler shipping options
Choosing a Shipping Method for Dock Leveler
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Dock Leveler shipment | Common shipping option |
|---|---|
| Dock leveler deck | LTL or volume service with weight and handling review |
| Crated dock leveler assembly | LTL or volume service with weight and handling review |
| Large dock leveler package | Partial truckload, volume LTL, or specialized service |
| Equipment with attachments and controls | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent dock leveler shipments may need carrier review before booking.
Dock Leveler Packaging, Stackability, and Damage Risk
Dock Leveler Packaging
- Lower, fold, or stow booms, platforms, decks, hooks, forks, and other moving equipment into the approved transport position.
- Secure the frame to a skid or transport base and restrain wheels, trolleys, chains, cables, and attachments.
- Protect controls, hydraulic lines, batteries, sensors, motors, gearboxes, and projecting components.
Dock Leveler Stackability
- Lifts, cranes, levelers, and irregular handling equipment are generally non-stackable.
- Only small boxed or crated components should be considered stackable when the package is load-bearing.
- Mark lift points, tie-down locations, center of gravity, and any required upright orientation.
Dock Leveler Fragility and Liability
- Prevent movement of booms, platforms, decks, drums, chains, or trolleys during handling and transit.
- Secure batteries and approved fluids and protect hydraulic cylinders, hoses, controls, and safety devices.
- Confirm carrier equipment, loading method, declared value, and specialized handling before pickup.
Before Requesting a Dock Leveler Freight Quote
How to Measure a Packaged Dock Leveler Shipment
- Measure after the dock leveler is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Dock Leveler Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Dock Leveler Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.