Compact submersible pump
Dense pump and cable secured in a protective crate
48 × 40 × 42 in
Packaged weight: 1,800 lb
- Cubic feet
- 46.67
- Density
- 38.57lb/cu ft
Estimated class
55
55
Submersible Pump LTL Shipping Guide
Freight Class for Submersible Pump
To estimate your shipment, use the Submersible Pump Freight Class Calculator.
The Submersible Pump Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 55 to 70.
These are density-based estimates.
Submersible Pump density calculator
Calculate Your Submersible Pump Freight Class
A long submersible pump crate is preloaded as an example. Adjust the packaged dimensions or weight to calculate your submersible pump freight class.
Your result
Cubic feet
70.00
Density
25.71
lb/cu ft
Estimated freight class
65
This is an example density-based estimate. Update any field to calculate your shipment.
Submersible Pump shipment examples
Submersible Pump Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic submersible pump shipment formats can produce different density-based class estimates.
Long submersible pump crate
Extended pump body with end blocking and cable protection
84 × 40 × 36 in
Packaged weight: 1,800 lb
- Cubic feet
- 70.00
- Density
- 25.71lb/cu ft
Estimated class
65
65
Multiple pump shipment
Several pumps and accessories consolidated on a pallet
96 × 48 × 48 in
Packaged weight: 2,200 lb
- Cubic feet
- 128.00
- Density
- 17.19lb/cu ft
Estimated class
70
70
Submersible Pump shipment comparison
Submersible Pump Freight Class by Shipment Format
Submersible Pump freight class can change with the pump or vessel geometry, motor and baseplate, ports and fittings, protective clearance, and accessory packaging. Use the finished packaged dimensions and total weight rather than the equipment's unpackaged size.
| Submersible Pump shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Compact submersible pump | Reinforced pallet or skid with blocking, restraint, and weather protection | Higher | Limited | Dense pump and cable secured in a protective crate; this example calculates to 38.57 lb/cu ft and Class 55. |
| Long submersible pump crate | Framed crate with internal restraint and protection for controls and moving parts | Medium to higher | Possible with engineered crate | Extended pump body with end blocking and cable protection; this example calculates to 25.71 lb/cu ft and Class 65. |
| Multiple pump shipment | Elongated or oversized crate with structural bracing and protective clearance | Medium to higher | Usually non-stackable | Several pumps and accessories consolidated on a pallet; this example calculates to 17.19 lb/cu ft and Class 70. |
| Equipment with motor, controls, and accessories | Main skid or vessel plus separately secured motor parts, filters, valves, controls, hoses, and fittings | Varies | Usually limited | Include every accessory and connection inside the final dimensions and total packaged weight. |
Submersible Pump shipping options
Choosing a Shipping Method for Submersible Pump
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Submersible Pump shipment | Common shipping option |
|---|---|
| Compact submersible pump | Standard LTL with packaging and handling review |
| Long submersible pump crate | Standard LTL with packaging and handling review |
| Multiple pump shipment | LTL with handling review or volume service |
| Equipment with motor, controls, and accessories | LTL, volume, partial truckload, or dedicated service after piece-count and handling review |
Heavy, long, high-value, non-stackable, multi-piece, or rigging-dependent submersible pump shipments may need carrier review before booking.
Submersible Pump Packaging, Stackability, and Damage Risk
Submersible Pump Packaging
- Bolt the pump, dryer, or receiver to a reinforced pallet, skid, saddles, or support frame.
- Cap flanges, ports, drains, valves, cable entries, and exposed fittings to prevent impact and contamination.
- Protect shafts, couplings, seals, gauges, controls, filters, motors, and projecting connections.
Submersible Pump Stackability
- Treat tall vessels, exposed piping, irregular skids, and equipment with projecting fittings as non-stackable.
- Use a load-bearing crate or separate structural frame if stacking is required.
- Keep lifting eyes, fork-entry points, saddles, and center-of-gravity markings accessible.
Submersible Pump Fragility and Liability
- Drain or secure approved fluids and prevent residual liquid from leaking into the package.
- Immobilize rotating assemblies and protect precision seals, bearings, couplings, and instrument connections.
- Confirm declared value and coverage for engineered pump systems and compressed-air equipment.
Before Requesting a Submersible Pump Freight Quote
How to Measure a Packaged Submersible Pump Shipment
- Measure after the submersible pump is secured and all pallet, skid, crate, framing, guards, and protective materials are complete.
- Include runners, saddles, legs, controls, fittings, attachments, overhang, and every projecting packaged component.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Submersible Pump Freight Quote Checklist
- Record the finished packaged length, width, height, and total weight.
- State whether the shipment is stackable and whether top loading is prohibited.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- List detached controls, guards, accessories, tooling, fittings, and other separate pieces.
- Confirm forklift, dock, crane, rigging, liftgate, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Submersible Pump Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.