Dense label rolls
Multiple roll cartons on a standard pallet
48 × 40 × 30 in
Packaged weight: 950 lb
- Cubic feet
- 33.33
- Density
- 28.50 lb/cu ft
Estimated class
65
65
Labels LTL Shipping Guide
Freight Class for Labels
To estimate your shipment, use the Labels Freight Class Calculator.
The Labels Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 65 to 125.
These are density-based estimates.
Labels density calculator
Calculate Your Labels Freight Class
A palletized label-roll shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your labels freight class.
Your result
Cubic feet
46.67
Density
18.21
lb/cu ft
Estimated freight class
70
This is an example density-based estimate. Update any field to calculate your shipment.
Labels shipment examples
Labels Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all labels shipments.
Cartoned sheet labels
Flat cartons of printed sheet stock
48 × 40 × 42 in
Packaged weight: 650 lb
- Cubic feet
- 46.67
- Density
- 13.93 lb/cu ft
Estimated class
85
85
Light display labels
Bulky retail display and label packs
48 × 40 × 60 in
Packaged weight: 450 lb
- Cubic feet
- 66.67
- Density
- 6.75 lb/cu ft
Estimated class
125
125
Labels shipment comparison
Labels Freight Class by Shipment Type
Label shipments range from dense rolls on heavy cores to lightweight sheet labels, retail packs, and display-ready cartons. Finished density depends on roll diameter, core size, carton fill, pallet height, and how much protective space is needed around printed surfaces.
| Labels shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Pressure-sensitive label rolls | Rolls packed upright in reinforced cartons | High | Usually stackable | Block roll movement and keep cores aligned. |
| Sheet labels and printed stock | Flat cartons on a pallet | Medium to high | Usually stackable | Prevent edge curl, moisture exposure, and carton compression. |
| Retail label packs | Master cartons with dividers | Medium | Usually stackable | Protect barcodes, facing panels, and retail-package condition. |
| Large-format or specialty labels | Tubes, flat packs, or custom cartons | Low to medium | Limited | Control bending, telescoping, and surface abrasion. |
labels shipping options
Choosing a Shipping Method for Labels
The right service depends on labels size, packaging, stackability, and handling needs.
| Labels shipment | Common shipping option |
|---|---|
| Uniform cartons of label rolls | Standard LTL |
| Sheet labels in flat cartons | Standard LTL |
| Large-format specialty labels | Limited-stack LTL |
| High-value printed or security labels | Secure or specialized service |
Large, irregular, non-stackable, unusually valuable, or specially handled labels shipments may need carrier review before booking.
Labels Packaging, Stackability, and Damage Risk
Labels Packaging
- Use reinforced cartons with core supports or dividers that stop label rolls from shifting.
- Keep sheet labels flat with moisture barriers, edge boards, and level pallet layers.
- Protect printed faces, release liners, barcodes, and retail packs from abrasion and wrap pressure.
Labels Stackability
- Uniform roll cartons generally stack when case compression limits are verified.
- Flat sheet-label cartons need a rigid top cap and even weight distribution.
- Treat large-format tubes, display packs, and lightly filled cartons as limited-stack.
Labels Moisture, Adhesive, Core, and Printed-Surface Protection
- Prevent roll telescoping, crushed cores, liner distortion, edge curl, and printed-surface scuffing.
- Keep labels dry and away from heat that can affect adhesives, coatings, or release liners.
- Document print lot, roll count, core size, carton condition, and declared value for specialty stock.
Before Requesting a Labels Freight Quote
How to Measure a Packaged Labels Shipment
- Measure after all cartons, tubes, corner boards, top caps, straps, and wrap are installed.
- Include carton bulges, tube ends, display packs, and pallet overhang.
- Use the total packaged weight of all labels, cores, cartons, pallet, and securement.
Labels Freight Quote Checklist
- Measure the finished pallet, carton group, tube, or flat pack containing the labels.
- Record the total packaged weight of the complete labels shipment, including cores and cartons.
- State whether the finished pallet has a flat reinforced top or requires limited-stack handling.
- Include photos of roll cores, carton layers, printed faces, moisture barriers, top cap, and labels.
- Confirm climate protection, liftgate, inside-delivery, declared-value, and security requirements.
Freight Planning Calculators
Calculate and Plan Your Labels Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.