Wall-mount enclosure
Boxed empty steel enclosure
30 × 18 × 36 in
Packaged weight: 85 lb
- Cubic feet
- 11.25
- Density
- 7.56lb/cu ft
Estimated class
125
125
Electrical Enclosure LTL Shipping Guide
Freight Class for Electrical Enclosures and Cabinets
To estimate your shipment, use the Electrical Enclosure Freight Class Calculator.
The Electrical Enclosure Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 92.5–175.
These are density-based estimates.
Electrical Enclosure density calculator
Calculate Your Electrical Enclosure Freight Class
A palletized empty enclosure is preloaded as an example. Adjust the packaged dimensions or weight to calculate your electrical enclosure freight class.
Your result
Cubic feet
72.00
Density
4.31
lb/cu ft
Estimated freight class
175
This is an example density-based estimate. Update any field to calculate your shipment.
Electrical Enclosure shipment examples
Electrical Enclosure Freight Class Examples
These examples use finished outside dimensions and total packaged weight. They show how three realistic electrical enclosure shipment formats can produce different density-based class estimates.
Empty floor-standing cabinet
Palletized empty enclosure
48 × 36 × 72 in
Packaged weight: 310 lb
- Cubic feet
- 72.00
- Density
- 4.31lb/cu ft
Estimated class
175
175
Populated electrical enclosure
Crated cabinet with installed components
48 × 40 × 78 in
Packaged weight: 900 lb
- Cubic feet
- 86.67
- Density
- 10.38lb/cu ft
Estimated class
92.5
92.5
Electrical Enclosure shipment comparison
Electrical Enclosure Freight Class by Shipment Format
Electrical Enclosure freight class can change with finished packaging, density, weight distribution, protective clearance, and stackability. Use the finished packaged dimensions and total weight rather than the unpackaged product size.
| Electrical Enclosure shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Wall-mount enclosure | Boxed empty steel enclosure | Medium to lower | Conditional | Protect door edges, hinges, gasket surfaces, and mounting flanges. This example calculates to 7.56 lb/cu ft and Class 125. |
| Empty floor-standing cabinet | Palletized empty enclosure | Lower | Non-stackable | Bolt the base down and use internal cross-bracing. This example calculates to 4.31 lb/cu ft and Class 175. |
| Populated electrical enclosure | Crated cabinet with installed components | Medium to lower | Non-stackable | Brace internal equipment and protect controls, doors, and cable-entry plates. This example calculates to 10.38 lb/cu ft and Class 92.5. |
| Multi-piece or accessory shipment | Main electrical enclosure package plus separately protected components, accessories, or mounting hardware | Varies | Confirm each piece | List every separate piece and include its finished dimensions, weight, packaging, and stackability in the quote request. |
Electrical Enclosure shipping options
How Shipping Method Affects Electrical Enclosure Freight Class
The appropriate service depends on finished dimensions, packaged weight, piece count, loading method, value, stackability, and whether specialized handling is required.
| Electrical Enclosure shipment | Common shipping option |
|---|---|
| Wall-mount enclosure | Parcel or LTL, depending on carton count, value, and handling requirements |
| Empty floor-standing cabinet | LTL with packaging, stackability, and handling review |
| Populated electrical enclosure | LTL with packaging, stackability, and handling review |
| Multi-piece, high-value, or special-handling shipment | LTL, volume, partial truckload, dedicated, or specialized service after piece-count and handling review |
Small empty boxes may ship parcel; floor-standing and populated enclosures should move by LTL.
Electrical Enclosure Packaging, Stackability, and Damage Risk
Electrical Enclosure Packaging
- Corner and door protection, internal cross-bracing, pallet anchoring, and moisture barrier.
- Protect door edges, hinges, gasket surfaces, and mounting flanges.
- Bolt the base down and use internal cross-bracing.
Electrical Enclosure Stackability
- Stackable only with strong corner protection.
- Non-stackable because the cabinet can deform.
- Non-stackable.
Electrical Enclosure Fragility and Liability
- Panel deformation, bent doors, damaged gaskets, and shifted installed components.
- Brace internal equipment and protect controls, doors, and cable-entry plates.
- Confirm declared value, coverage, orientation, and any top-load or special-handling restrictions before tendering electrical enclosure freight.
Before Requesting a Electrical Enclosure Freight Quote
How to Measure a Packaged Electrical Enclosure Shipment
- Measure after the electrical enclosure is secured and all cartons, pallets, skids, crates, framing, and protective materials are complete.
- Include runners, legs, reels, doors, fittings, cables, brackets, accessories, overhang, and every projecting packaged component that applies.
- Measure to the longest, widest, and tallest finished point and use the total tendered shipment weight.
Electrical Enclosure Freight Quote Checklist
- Record the finished packaged length, width, height, quantity, and total weight.
- State whether the shipment is stackable and whether top loading or side loading is restricted.
- Include photos showing packaging, securement, labels, lift points, and exposed risk areas when practical.
- Describe the exact electrical enclosure shipment format and list detached components, accessories, cables, mounting hardware, or separate pieces.
- Confirm forklift, dock, liftgate, crane, rigging, inside-delivery, or specialized loading requirements.
Freight Planning Calculators
Calculate and Plan Your Electrical Enclosure Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.