Knock-down rack bundle
Dense aligned beams and uprights
96 × 48 × 24 in
Packaged weight: 1500 lb
- Cubic feet
- 64.00
- Density
- 23.44 lb/cu ft
Estimated class
65
65
Metal Racks LTL Shipping Guide
Freight Class for Metal Racks
To estimate your shipment, use the Metal Racks Freight Class Calculator.
The Metal Racks Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 65 to 300.
These are density-based estimates.
Metal Racks density calculator
Calculate Your Metal Racks Freight Class
A knock-down metal rack shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your metal racks freight class.
Your result
Cubic feet
80.00
Density
15.00
lb/cu ft
Estimated freight class
70
This is an example density-based estimate. Update any field to calculate your shipment.
Metal Racks shipment examples
Metal Racks Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all metal racks shipments.
Palletized rack sections
Nested rack sections and hardware cartons
96 × 48 × 36 in
Packaged weight: 1200 lb
- Cubic feet
- 96.00
- Density
- 12.50 lb/cu ft
Estimated class
85
85
Assembled rack frame
Large open frame with low density
84 × 48 × 72 in
Packaged weight: 500 lb
- Cubic feet
- 168.00
- Density
- 2.98 lb/cu ft
Estimated class
300
300
Metal Racks shipment comparison
Metal Racks Freight Class by Shipment Type
Metal racks may ship as dense knock-down bundles or bulky assembled frames. Length, nesting, protrusions, finish, bundle rigidity, and whether beams and uprights are separated strongly affect density and handling.
| Metal Racks shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Knock-down uprights and beams | Aligned bundles on long skid | High | Usually stackable | Separate component types and protect ends. |
| Palletized rack sections | Nested frames and hardware cartons | Medium to high | Limited | Brace nested frames and contain loose hardware. |
| Assembled rack frame | Custom skid or open crate | Low | Non-stackable | Prevent tipping and protect protruding feet. |
| Specialty display or mobile racks | Wrapped frame with casters secured | Low | Non-stackable | Lock wheels and brace shelves or arms. |
metal racks shipping options
Choosing a Shipping Method for Metal Racks
The right service depends on metal racks size, packaging, stackability, and handling needs.
| Metal Racks shipment | Common shipping option |
|---|---|
| Knock-down rack bundles | Standard or long-freight LTL |
| Nested rack sections | Limited-stack LTL |
| Assembled racks | Oversize or specialized LTL |
| Large rack installation order | Volume, flatbed, or dedicated service |
Large, irregular, non-stackable, unusually valuable, or specially handled metal racks shipments may need carrier review before booking.
Metal Racks Packaging, Stackability, and Damage Risk
Metal Racks Packaging
- Bundle uprights, beams, braces, and shelves separately with edge protectors and rated bands.
- Use long skids, blocking, or cradles that support the full length of rack components.
- Contain bolts, clips, feet, anchors, and other hardware in labeled secured cartons.
Metal Racks Stackability
- Aligned knock-down bundles may stack when dunnage and bands are positioned consistently.
- Nested rack sections need reinforced tops and stable geometry before accepting top load.
- Treat assembled, wheeled, protruding, or open-frame racks as non-stackable.
Metal Racks Length, Finish, Tip, and Component-Control Protection
- Protect powder coating, beam connectors, slots, feet, casters, brackets, and exposed corners.
- Prevent bundle spreading, frame distortion, tip-over, forklift tine contact, and lost hardware.
- Document component counts, lengths, finish, bundle sequence, and installation-set labeling.
Before Requesting a Metal Racks Freight Quote
How to Measure a Packaged Metal Racks Shipment
- Measure after all frames, beams, uprights, skids, blocking, cartons, and bands are installed.
- Include protruding feet, beam ends, casters, brackets, and pallet overhang.
- Use the total packaged weight of rack components, hardware, skids, and securement.
Metal Racks Freight Quote Checklist
- Measure the finished bundle, skid, pallet, nested frame group, or assembled rack.
- Record the total packaged weight of the complete metal rack shipment and longest component.
- State whether bundles are aligned for stacking or assembled frames require no-top-load handling.
- Include photos of beam ends, upright slots, powder coating, skids, banding, hardware cartons, and labels.
- Confirm long-freight, forklift-length, flatbed, liftgate, appointment, and installation-site unloading requirements.
Freight Planning Calculators
Calculate and Plan Your Metal Racks Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.