Dense LED lamp cases
Compact cases of LED bulbs on a pallet
48 × 40 × 36 in
Packaged weight: 250 lb
- Cubic feet
- 40.00
- Density
- 6.25 lb/cu ft
Estimated class
125
125
Light Bulbs LTL Shipping Guide
Freight Class for Light Bulbs
To estimate your shipment, use the Light Bulbs Freight Class Calculator.
The Light Bulbs Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 85 to 250.
These are density-based estimates.
Light Bulbs density calculator
Calculate Your Light Bulbs Freight Class
A palletized light-bulb shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your light bulbs freight class.
Your result
Cubic feet
66.67
Density
5.25
lb/cu ft
Estimated freight class
175
This is an example density-based estimate. Update any field to calculate your shipment.
Light Bulbs shipment examples
Light Bulbs Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all light bulbs shipments.
Mixed bulb cartons
Cell-divided household bulb cartons
48 × 40 × 60 in
Packaged weight: 350 lb
- Cubic feet
- 66.67
- Density
- 5.25 lb/cu ft
Estimated class
175
175
Long fluorescent tubes
Long lightweight tube cartons
96 × 40 × 48 in
Packaged weight: 500 lb
- Cubic feet
- 106.67
- Density
- 4.69 lb/cu ft
Estimated class
175
175
Light Bulbs shipment comparison
Light Bulbs Freight Class by Shipment Type
Light bulbs are fragile and typically low density because protective cells, dividers, and void space are needed around glass envelopes and long tubes. Compact LED lamp cases can be denser, while fluorescent tubes and decorative bulbs need tall or elongated packages.
| Light Bulbs shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| LED and compact lamp cases | Partitioned cartons on a pallet | Low to medium | Usually stackable | Protect lenses, bases, and electronics from compression. |
| Incandescent and decorative bulbs | Cell-divided cartons in master cases | Low | Limited | Keep bulbs separated and support necks and bases. |
| Fluorescent or LED tubes | Long divided cartons | Very low | Limited | Support carton length and prevent bending or end impact. |
| Mixed retail lamp assortment | Master cartons with internal cells | Low | Limited | Separate bulb shapes and prevent case voids. |
light bulbs shipping options
Choosing a Shipping Method for Light Bulbs
The right service depends on light bulbs size, packaging, stackability, and handling needs.
| Light Bulbs shipment | Common shipping option |
|---|---|
| Uniform cases of LED lamps | Standard LTL |
| Mixed cartons of household bulbs | Limited-stack LTL |
| Long fluorescent or LED tubes | Specialized long-carton LTL |
| High-value decorative or specialty lamps | Secure fragile service |
Large, irregular, non-stackable, unusually valuable, or specially handled light bulbs shipments may need carrier review before booking.
Light Bulbs Packaging, Stackability, and Damage Risk
Light Bulbs Packaging
- Use individual cells, sleeves, molded trays, or dividers that prevent bulb-to-bulb contact.
- Support long tube cartons along their full length and reinforce both ends.
- Build level pallet layers with corner boards, a top cap, and light wrap tension that does not crush cases.
Light Bulbs Stackability
- Uniform LED lamp cases may stack within verified carton-compression limits.
- Mixed bulb cartons generally require limited-stack handling and a rigid top cap.
- Treat long tube cartons as limited-stack unless supported by a purpose-built rack or crate.
Light Bulbs Breakage, Tube-End, Carton-Crush, and Lamp Protection
- Protect glass envelopes, filaments, LED lenses, electronic drivers, screw bases, pins, and tube ends.
- Prevent vibration, end impact, case compression, and carton bending during transfers.
- Document lamp type, carton count, breakage indicators, hazardous-material status where applicable, and declared value.
Before Requesting a Light Bulbs Freight Quote
How to Measure a Packaged Light Bulbs Shipment
- Measure after all cartons, dividers, top caps, corner boards, straps, and wrap are installed.
- Include long-carton ends, carton bulges, mixed-case heights, and pallet overhang.
- Use the total packaged weight of all lamps, cartons, dividers, pallet, and securement.
Light Bulbs Freight Quote Checklist
- Measure the finished pallet, case group, or long-carton bundle containing the light bulbs.
- Record the total packaged weight of the complete light-bulb shipment.
- State whether the cartons are compression-rated for stacking or require limited-stack handling.
- Include photos of dividers, tube-carton ends, pallet layers, top cap, labels, and visible damage.
- Confirm fragile handling, long-carton, liftgate, disposal-documentation, and declared-value requirements.
Freight Planning Calculators
Calculate and Plan Your Light Bulbs Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.