Dense disposable glove cases
Uniform cartons of boxed disposable gloves
48 × 40 × 48 in
Packaged weight: 600 lb
- Cubic feet
- 53.33
- Density
- 11.25 lb/cu ft
Estimated class
Density-based
92.5
Glove LTL Shipping Guide
Freight Class for Gloves
To estimate your shipment, use the Gloves Freight Class Calculator.
The Gloves Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 92.5 to 300.
These are density-based estimates.
Gloves density calculator
Calculate Your Gloves Freight Class
A palletized glove shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your glove freight class.
Your result
Cubic feet
66.67
Density
6.00
lb/cu ft
Estimated freight class
125
This is an example density-based estimate. Update any field to calculate your shipment.
Gloves shipment examples
Gloves Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all glove shipments.
Work-glove cartons
Mixed cartons of leather and coated gloves
48 × 40 × 60 in
Packaged weight: 400 lb
- Cubic feet
- 66.67
- Density
- 6.00 lb/cu ft
Estimated class
Density-based
125
Bulky insulated gloves
Large cartons of winter and insulated gloves
60 × 48 × 72 in
Packaged weight: 220 lb
- Cubic feet
- 120.00
- Density
- 1.83 lb/cu ft
Estimated class
Density-based
400
Gloves shipment comparison
Gloves Freight Class by Shipment Type
Glove shipments range from dense cases of disposable products to bulky insulated, leather, or protective gloves with substantial air space. Carton count, compression, retail packaging, moisture barriers, case strength, and mixed sizes determine the finished density and stackability.
| Gloves shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Disposable glove cases | Uniform retail or medical cases on a pallet | Medium | Usually stackable | Keep cases dry and protect box corners from strap pressure. |
| Work and leather gloves | Cartons or polybagged cases | Low to medium | Limited | Control carton bulging and prevent moisture or oil contamination. |
| Insulated winter gloves | Compressed polybags in master cartons | Very low | Limited | Maintain compression and avoid permanent flattening. |
| Specialty protective gloves | Sealed cartons with documentation | Varies | Limited | Protect coatings, cuffs, labels, and certification records. |
glove shipping options
Choosing a Shipping Method for Gloves
The right service depends on glove size, packaging, stackability, and handling needs.
| Gloves shipment | Common shipping option |
|---|---|
| Uniform disposable-glove cases | Standard LTL |
| Work-glove cartons on a pallet | Standard LTL with stackability review |
| Bulky insulated glove cartons | Volume or limited-stack LTL |
| High-value or certified protective gloves | Secure or specialized service |
Large, irregular, non-stackable, unusually valuable, or specially handled glove shipments may need carrier review before booking.
Gloves Packaging, Stackability, and Damage Risk
Gloves Packaging
- Pack gloves in sealed bags or inner cartons inside strong, moisture-resistant master cases.
- Use compression only when it will not damage insulation, coatings, cuffs, or retail packaging.
- Build square pallet layers with corner boards, stretch wrap, and a rigid top cap.
Gloves Stackability
- Uniform disposable-glove cases may stack when cartons remain dry and structurally sound.
- Mixed or bulging work-glove cartons often require limited stacking.
- Treat large insulated-glove cartons as no-top-load when compression could damage the product.
Glove Moisture, Compression, Coating, and Cleanliness Protection
- Prevent moisture, oil, dirt, carton crushing, retail-package damage, and coating abrasion.
- Keep medical, cleanroom, chemical-resistant, and certified gloves sealed and segregated.
- Document lot numbers, carton count, certification labels, and declared value where relevant.
Before Requesting a Gloves Freight Quote
How to Measure a Packaged Gloves Shipment
- Measure after inner bags, master cartons, corner boards, top caps, and stretch wrap are installed.
- Include carton bulging, pallet overhang, compression bands, and protective covers.
- Use the total packaged weight of all gloves, cartons, bags, pallet, and wrap.
Gloves Freight Quote Checklist
- Measure the finished carton pallet, compressed bundle, or crate containing the gloves.
- Record the total packaged weight of the complete glove shipment, including retail and master packaging.
- State whether the cartons can support top weight without crushing insulation, cuffs, or retail boxes.
- Include photos of case layers, compression, bulging cartons, top caps, labels, and moisture protection.
- Confirm clean-handling, temperature, secure-service, liftgate, and no-top-load requirements.
Freight Planning Calculators
Calculate and Plan Your Gloves Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.