Dense palletized rolls
Multiple compact textile rolls secured upright
48 × 40 × 36 in
Packaged weight: 1050 lb
- Cubic feet
- 40.00
- Density
- 26.25 lb/cu ft
Estimated class
Density-based
65
Fabric Roll LTL Shipping Guide
Freight Class for Fabric Rolls
To estimate your shipment, use the Fabric Rolls Freight Class Calculator.
The Fabric Rolls Freight Class Examples use the current 13-tier density scale, effective July 19, 2025, and range from Class 65 to 175.
These are density-based estimates.
Fabric Rolls density calculator
Calculate Your Fabric Rolls Freight Class
A palletized fabric-roll shipment is preloaded as an example. Adjust the packaged dimensions or weight to calculate your fabric roll freight class.
Your result
Cubic feet
84.00
Density
10.71
lb/cu ft
Estimated freight class
92.5
This is an example density-based estimate. Update any field to calculate your shipment.
Fabric Rolls shipment examples
Fabric Rolls Freight Class Examples
These examples use packaged outside dimensions and the site’s density-to-class chart. They are examples only, not fixed classes for all fabric roll shipments.
Long wrapped rolls
Horizontal fabric rolls on a long skid
84 × 48 × 36 in
Packaged weight: 900 lb
- Cubic feet
- 84.00
- Density
- 10.71 lb/cu ft
Estimated class
Density-based
92.5
Light specialty fabric
Bulky low-density decorative fabric rolls
96 × 48 × 48 in
Packaged weight: 600 lb
- Cubic feet
- 128.00
- Density
- 4.69 lb/cu ft
Estimated class
Density-based
175
Fabric Rolls shipment comparison
Fabric Rolls Freight Class by Shipment Type
Fabric rolls vary from dense palletized textile stock to long, lightweight specialty materials. Core diameter, roll length, wrapping, pallet orientation, moisture barriers, and overhang can substantially change the occupied cube and stackability.
| Fabric Rolls shipment | Typical packaging | Density tendency | Stackability | Planning note |
|---|---|---|---|---|
| Short textile rolls | Stretch-wrapped upright rolls on a pallet | High | Usually stackable | Keep rolls inside the pallet footprint and protect exposed cores. |
| Long horizontal rolls | Wrapped and blocked on a long skid | Medium | Limited | Use saddles or chocks so cylindrical rolls cannot move. |
| Delicate decorative fabric | Sleeved or boxed rolls with end protection | Low to medium | Limited | Prevent crushing, snagging, staining, and moisture exposure. |
| Large specialty rolls | Crated or suspended roll assembly | Low | Usually non-stackable | Protect the full roll length and avoid point loads on the material. |
fabric roll shipping options
Choosing a Shipping Method for Fabric Rolls
The right service depends on fabric roll size, packaging, stackability, and handling needs.
| Fabric Rolls shipment | Common shipping option |
|---|---|
| Palletized short fabric rolls | Standard LTL |
| Long wrapped rolls on a skid | Long-freight LTL |
| Delicate or high-value fabric rolls | Crated LTL |
| Oversized specialty textile rolls | Specialized or dedicated service |
Large, irregular, non-stackable, unusually valuable, or specially handled fabric roll shipments may need carrier review before booking.
Fabric Rolls Packaging, Stackability, and Damage Risk
Fabric Rolls Packaging
- Wrap each roll against moisture, dust, abrasion, and loose fibers.
- Use end caps, core plugs, saddles, or chocks to prevent roll movement and crushed cores.
- Keep long rolls fully supported and within the skid footprint whenever possible.
Fabric Rolls Stackability
- Compact upright rolls may stack when the pallet and top surface are level and reinforced.
- Long horizontal rolls allow limited stacking only with engineered saddles or a rigid crate.
- Treat delicate, loosely wrapped, or oversized rolls as non-stackable.
Fabric Roll Moisture, Core, and Surface Protection
- Prevent fabric crushing, core collapse, moisture staining, snags, and edge abrasion.
- Keep straps from cutting into soft rolls by using wide protectors and corner boards.
- Confirm handling instructions for coated, fire-rated, technical, or high-value textiles.
Before Requesting a Fabric Rolls Freight Quote
How to Measure a Packaged Fabric Rolls Shipment
- Measure after wrapping, end caps, saddles, cartons, crates, and skid supports are installed.
- Include roll overhang, protruding cores, chocks, corner boards, and protective end framing.
- Use the total packaged weight of all rolls, cores, wrappers, cartons, and skid materials.
Fabric Rolls Freight Quote Checklist
- Measure the finished pallet, long skid, bundle, or crate containing the fabric rolls.
- Record the total packaged weight of the complete fabric-roll shipment, including cores and support materials.
- State whether the roll package has a level reinforced top or requires limited-stack handling.
- Include photos of roll orientation, cores, end protection, wrapping, saddles, straps, and skid overhang.
- Confirm long-freight, forklift, liftgate, moisture-protection, and no-top-load requirements.
Freight Planning Calculators
Calculate and Plan Your Fabric Rolls Shipment
Use the freight class, density, pallet, and linear-feet calculators to plan your packaged LTL shipment.
Freight Class Calculator
Estimate freight class from packaged dimensions, weight, and density.
Freight Density Calculator
Calculate cubic feet and pounds per cubic foot for packaged freight.
Pallet Freight Calculator
Plan pallet dimensions, shipment weight, density, and configuration.
Freight Linear Feet Calculator
Estimate trailer-space usage for pallets and non-stackable freight.
Freight classes shown on this page are density-based estimates for shipment planning. Actual classification may also depend on value, handling requirements, liability, stowability, dimensions, and other commodity-specific factors. Confirm the final freight class with your carrier, broker, or official NMFC resources before shipping. NMFC® is a registered trademark of the National Motor Freight Traffic Association, Inc. FreightClassCalculator.tools is an independent calculator and is not affiliated with, endorsed by, or licensed by NMFTA.